I'm a Northeastern University Mechanical Engineering student, drawn to manufacturing, product development, and building smarter systems, from biomedical devices to energy. Here's a look at the things that keep me curious.
Scroll to see moreI'm Noor Marzouk, a Mechanical Engineering student at Northeastern University. I chose engineering because I have always loved figuring out how things fit together. I design personal projects in CAD, build Lego sets, solve puzzles both mental and physical, and print my ideas on my 3D printer. Engineering lets me turn that curiosity into products people actually use.
That mindset has shaped my co-ops. At Insulet, I led a Six Sigma project that cut production scrap from 15% to 0.9%, saving over $132K a year, and ran hands-on test method validation in a cleanroom. At Apex, I built maps and record drawings for water infrastructure projects. Along the way, I have developed a strong foundation in SolidWorks, root-cause analysis, and data analysis, and I am comfortable moving from concept to prototype to testing.
After I graduate in April 2028, I want to build a career in manufacturing, energy systems, product design, or medical devices, designing and building things that work in the real world. More than anything, I want to make a difference and help improve people's lives for the better, whether that's through medical devices that support patients, energy systems that make clean power more reliable, or products people rely on every day. Wherever that takes me, I plan to keep learning hands-on and growing as a problem solver along the way.

Turning tooling, fixtures, and process design into parts I can produce again and again.
Thermal, mechanical, and structural design for hardware that stores, moves, or converts energy.
Taking user-facing hardware from concept sketch through prototyping to something people use.
Hands-on test method validation and component qualification, where precision and care matter.

Led a Six Sigma/Lean project that cut scrap on a problem component from 15% to 0.9%, saving $132K+ a year and unlocking 260,000+ units of capacity.

Supported a $33.7M PFAS water treatment plant for the Town of Sharon with 100+ submittals/RFIs and CAD piping layouts.

Built an Encanto-themed exhibit with my team, teaching kids how sedum green roofs support sustainability.

Studied renewable energy in Andalucía and argued how the region can grow solar capacity without sacrificing its olive groves and historic landscapes.

Met with GE Vernova leaders to discuss decarbonizing gas turbines through carbon capture and green hydrogen.

One of Insulet's assembly cells uses a camera to check that a small metal piece is seated correctly inside a molded plastic part. If it pops out or sits at the wrong angle, the camera rejects it and the whole subassembly gets scrapped.
When I dug into the data from January to March 2026, this one reject turned out to be the biggest source of scrap in the cell. It averaged over 1,300 rejects a day and made up 43% of the cell's scrap. It also traced back to a single cavity in the supplier's mold. Whenever parts from that cavity ran on one of the lines, scrap jumped to about 15%, compared with about 2% for the other cavities.
That meant wasted material and money, a slower line, and a problem sitting right in front of a planned production ramp-up. My goal was to get scrap from 15% down to 2% by June 2026, when my co-op ended.
I followed DMAIC (Define, Measure, Analyze, Improve, Control), which is Six Sigma's step-by-step way of solving a problem with data.
Define: I wrote the project charter and mapped out who was affected and how the process flows. At first I looked at two cavities that operators and quality kept complaining about. The run charts showed that only one of them was the real problem. The complaint about the other had been hearsay, not data. I dropped it, focused on the problem cavity, and showed the floor how to read cavity numbers so we would not get false calls again.
Measure: I reviewed the camera's test method validation (700 samples, each run 3 times, 100% agreement), so I knew the rejects were real. Then I charted scrap by line over time. Every spike lined up with that cavity running.
Analyze: I built a fishbone diagram of possible causes and narrowed it down to cavity wear or variation from the supplier. Under the microscope, every rejected part had the same mark in one spot, where the metal piece had been scraping on its way in. CT scans and OGP measurements (a precise optical measuring machine) showed that the width of one side of the part changed from lot to lot by about 0.001 inches. I ran a 2-sample t-test in Minitab on 10 parts from each lot, and the difference was real (p < 0.05), not noise. The reason it kept happening was that the drawing only gave the overall width, not that individual width. It could come out uneven and the part would still pass.
Improve: I set up a meeting with our supplier quality engineers, then met with the supplier, showed them our findings, and asked about their maintenance process. The supplier modified the cavities in the tool, and I worked with material control to erase the bad cavities from the floor. The team also agreed on three fixes: update dimensions on the engineering drawing, make it a “critical to process” dimension, and require the supplier to send us data on it every few lots.
Control: I confirmed the results with run charts, then wrote up next steps with the component owner and a date for each one. The drawing update and supplier changes finish after my co-op ends, so I wanted the handoff to be clear.
Scrap from that cavity went from 15% to 0.9%. My goal was 2%, so I came in well under it, and that works out to a 94% reduction. The cell right after ours had a related reject that dropped too, from 3.5% to 1.3%.
The solution saved the company $132K+ a year, roughly $55K at the first cell and $77K at the next. It also frees up 260,000+ units of capacity a year and about 100 machine hours, without buying any new equipment.
The fix should stick, too. The drawing now calls out that width and the supplier has to hold it as well, and the same approach could work on the other lines.
The biggest lesson for me was to collect data before guessing at a root cause. Chasing the wrong cavity early on taught me that. I earned my Six Sigma/Lean Purple Belt through this project.




The Town of Sharon needed a new Water Treatment Facility to remove PFAS, along with elevated manganese and iron, from three source wells. PFAS are linked to serious health risks even at low exposure, and drinking water rules cap them at 20 parts per trillion. The town needed a compliant, reliable plant, and the $33.7M project was funded by low-interest loans and federal and state grants.
This was a team project at Apex. My individual contribution was the paperwork, drawings and cost checks that kept design and construction moving: 100+ submittals and RFIs, 15 drawings including the piping layouts and base maps, and the invoice reviews.
Submittals and RFIs. I created 100+ submittals (contractor documents the engineer reviews to confirm the right materials and equipment) and RFIs (formal requests for information). Each one had to be clear and accurate so the contractor could keep building.
Piping layouts. I used AutoCAD to draw the piping layouts for the treatment plant.
Maps and sketches. I developed water main base maps, tie-cards and design sketches for the town using Civil 3D.
Cost and scope checks. I validated contractor invoices against the approved bid scope and cost, so the town paid only for approved work.
I produced 100+ submittals and RFIs and 15 drawings, including the piping layouts and base maps, for a $33.7M facility. The submittals and RFIs got the contractor the answers and approvals they needed to keep building, the drawings gave the team accurate information to design and build from, and my invoice checks helped make sure loan and grant money only went toward approved work.
The plant is meant to give Sharon residents safe water that meets the 20 parts per trillion PFAS limit, and this work was part of getting it built.
Setting up a regular meeting schedule with the contractor, our team, and the town also taught me that communication on a project this size takes as much planning as the technical work.




The team was tasked with designing a portable, interactive tabletop exhibit to teach 8–11-year-olds about the sustainability of green roofs — within a $100 budget and strict size and transport constraints. We chose sedum-based green roofs as the theme, to show how a simple plant choice can build a more sustainable home and ecosystem.
We built an interactive exhibit where users help the Madrigal family from Disney's Encanto construct a sedum green roof for their Casita, answering questions about sedum's CO2 intake, pollinating, insulating, and root properties to light up the Casita and reveal the benefits of each choice. At the Beachmont Expo, 30 people played through the exhibit: 92% said they learned a lot, and 80% stayed for the whole experience.





While studying abroad in Seville, I took Engineering Computation and Design with a focus on renewable energy and sustainability, touring multiple energy companies and infrastructure sites across Andalucía. Learning directly from local engineers shaped my final project, an analysis of how Andalucía can grow its solar capacity without sacrificing the olive groves and historic landscapes that define the region.




A big part of the program was how Spain is shifting toward renewable energy. Between lectures and visits to energy companies and infrastructure sites around Andalucía, I got to learn directly from local engineers about what clean energy looks like when it's actually being built and run, not just on paper.
The photo is the PS10 and PS20 solar towers, about 20 km west of Seville. There are no panels here. Hundreds of mirrors track the sun and aim its light at a receiver on top of each tower, which heats water into steam to spin a turbine. PS10 was the world's first commercial plant of this kind, and seeing the towers rise out of the farmland is a big part of why the land-use question in my final project felt so real.

The academic side of the program was engineering computation and design, mostly finite element analysis (FEA). FEA breaks a part into thousands of small pieces so you can see where it carries the most stress before anyone builds it.
I modeled an engine block in SolidWorks from an engineering drawing, imported it into ANSYS, and gave it a custom material (E = 190 GPa, Poisson's ratio 0.26). I fixed the four holes, applied 750 psi to the main internal cylinder, and solved for stress and deformation.
The peak von Mises stress was 73.6 MPa (10,668 psi), well below the 241 MPa yield strength, so the block holds up with a factor of safety of 3.28. It was my first time using ANSYS, and it was slow and a little buggy, but seeing the stress show up on a 3D model I built myself made the class concepts click a lot faster than equations alone.




I had the opportunity to meet with several leaders at GE Vernova Gas Power to discuss ongoing developments in the future of energy, specifically how decarbonizing gas turbine systems could offer a clean, reliable, and high-density alternative to wind and solar. Conversations with engineers and business leaders across the team shaped my understanding of the technical and market challenges facing this space.